We love our cats. But if we’re honest, we hate cleaning and emptying litter trays around the house. The Self Cleaning Litter Tray not only gorgeous to look at, but will make your life easier and your cats life nicer.
Cat’s love a clean litter environment and are much more likely to use a litter tray that is sparkling clean even if a sibling or other cat has recently used it.
it works with 99% of clumping litters, so most cat owners can continue using their current litter.
There are four weight sensors on the it. One on each foot.
These are accurate to 50g (0.11 lbs) and can pick up weight as low as 200g (0.44 lbs) all the way up to 25kg (55 lbs) and more. This means that the LitterPaw is suitable for kittens who are training as well as big breeds.
After the cat enters the litter box, the sensor will take about three seconds to calibrate. After confirming the weight, it will be displayed on the LED display on the front of the device.
This weight reading will remain on the display for five minutes before the display turns off again. Oh, and by the way, it’s great if you need to weigh something before popping to the Post Office too!
Running a rake cycle (cleaning).
No matter if you have the it in manual or automatic mode – you can run a cleaning cycle at anytime by pushing the middle rake/plough button. If the paw button has a green light, the it has been set to automatic mode. So it will cycle automatically. If the paw button has a blue light, it has been set to manual mode. So when you want to run a cleaning cycle, you just need to press the button, as shown in this video.
Of course, in automatic and manual modes, the weight sensor and the motion sensor are always active, so if the cat is near or in the litter box, the cycle will stop.
Running a plow cycle (emptying).
It has a plow connected to the rake. When a thorough litter replacement is required, let the plough do all the hard work for you! It scans the garbage seven times, pushing all the garbage in the tray into the garbage bag. When you are done, just take out the bag and throw it away!
Setting the Delay Timer
Different clumping litters clump at different speeds. Our thinking with the it is the sooner the waste is out of the tray environment and in the waste compartment the better it is at reducing smells. To allow for this you can choose the delay time between your cat going to the toilet, leaving the LitterPaw® and the rake cycle starting. This can be one minute all the way up to seven minutes. Depending on how quickly the litter you use clumps the quicker you can set it to run a cycle. From our testing, most litters need between three and four minutes to clump well.
Removing the waste bag.
It has been designed to be used with most standard supermarket carrier bags. The bag simply clips to a wireframe and is very easy to insert and remove.
Refilling with litter.
The litter box is easy to fill with new litter.
Just take the lid off and pour straight in. It has been designed to work with clumping litters. It does not work with pellet based litters or silica/crystal litters.
The general rule of thumb is the litter you use needs to both clump and also be made up of fine granules. This is so the rake can pass effectively through the litter to collect and dispose of the waste.
- We offer 100% satisfaction guarantee, 40-day back money guarantee and 2-year warranty.
- We have 24/7/365 Facebook Messenger and Email support.
- Shipping takes 7-30 Days depending on location.
SALES ENDING SOON